Our Architectural Profile product line represents the progressive evolution of what we consider roofing and cladding products can and should be. Eurotray® and Europanel®, known for their distinct character and capability to be uniquely customised, continue to enjoy broad popularity among architects.
Eurotray® is a family of metal cladding systems, based on proven traditional European metal seaming methods. First introduced in the early 1990’s Eurotray® has evolved through countless installations, to be what it is today.
Eurotray® is a wide tray roofing system roll formed (on site if necessary) in single length trays, hidden fixed to a solid substrate and seamed together using a variety of seam and cap methods, depending on functional and aesthetical requirements.
Eurotray® allows greater flexibility in design than any other metal cladding system. Shapes can vary from the standard parallel tray to a conical tray, with straight or curved sheets.
It is possible to produce complex designs to enhance the profile and appearance of any particular building envelope. Eurotray® is an ideal cladding for roof, facade, soffit and fascia areas. Using traditional European techniques Eurotray® can be applied to complex designs and shapes, and can be used in turrets, fluted or curved roofs and facades.
This unique system in combination with the designer’s imagination, will create a lasting visual appearance.
Europanel® is a family of metal cladding systems based on proven traditional European wall panelling methods. Europanel® is produced by interlocking metal panels fixed using hidden clips to provide a rain screen system on a vented cavity.
The stunning look of Europanel® is ideal for aluminium, copper or titanium zinc materials and provides an unbeatable impact for your cladding application.
Europanel® also allows good flexibility in design. Shapes, sizes and even surface profile can vary from standard parallel panels to convex or concave shapes to clad internal domes or external curved wall applications. Panel sizes can also be varied to provide patterns and texture.
The system has been tested in accordance E2/VM1 to ensure compliance for New Zealand conditions.
|BMT||Min Pitch||Span (int/end)|
The Easyclad profile range offers three distinct profiles that allow building owners to incorporate new ideas at reasonable cost, and still maintain lasting good looks.
The three profiles can be run in Zincalume, pre-painted steel or Aluminium and are designed to simulate flat weatherboard, bevel back weatherboards or vertical board and batten. Easyclad installations are uncomplicated, look striking and have full production warranties.
Profiles shown (left to right) - Sidings - Weatherboard - Verticlad
AudioPerf® is a perforated ceiling system for commercial applications.
AudioPerf® is manufactured from perforated metal coil roll formed into a wide range of profiles including, Corrugate, Hi-Five, Six Rib, V6, V8 and Mega 5.
Developed for large and medium scale building applications and particularly large span ceiling applications AudioPerf® gives strong clean lines and bold symmetry. It can be used to create dynamic shadows and can be integrated with bespoke flashings to create negative details and installation points for sprinklers and lights.
When fixed in accordance with the installation instructions the system provides both acoustic attenuation and a fire rated ceiling.
AudioPerf® can be formed from a range of materials including AZ150 coated steel, pre-painted steel, copper, titanium zinc and stainless steel. In addition to this wide range of materials, AudioPerf® is available in a wide range of perforation patterns.